Amped Ally is a whole-home mesh WiFi system that is exclusively designed for users who want internet access every time. It covers all the dead zones in the home and fills them with a blazing-fast internet connection. The mesh WiFi system consists of an Ally extender and router that needs to be configured to make the most out of them. The best part is that you can do Amped wireless setup using two methods. What are those two methods? Let’s find out.
Methods to Do Amped Ally Setup
Amped Ally whole-home mesh WiFi system can be installed using two methods which are as follows:
-
Manual method
-
Ally app
Now, let’s have a look at the process of doing Amped Ally mesh WiFi system setup using both methods.
Amped Ally System Setup via Manual Method
Given below are the steps explaining the Amped Ally mesh WiFi setup using the manual method:
-
Begin with the placement of your Ally extender and Ally router in the same room.
-
Plug your Amped Ally extender as well as the Ally router into a wall socket.
-
Turn on your Ally devices by pressing their Power buttons.
-
Now, grab an Ethernet cable and connect your Ally devices using it.
-
Once done, pay some attention to your computer and switch it on.
-
Load up the most frequently used internet browser.
-
Type the default web address of the Amped Ally extender and press Enter.
-
The Amped Ally setup wizard will appear on your computer screen.
-
A few prompts will be displayed to guide you with the rest of the Amped Ally mesh WiFi system setup.
After following the prompts your Amped Ally mesh WiFi system will be all set to provide you with the highest possible internet speeds. However, you have to take care of the security of your WiFi system by setting up an Amped wireless extender login password during setup.
Found the manual method of doing Amped Ally setup difficult? No worries! You don’t have to do the hassle of accessing the Amped’s default web address during the setup via the app. So, let’s have a look at the steps to do Amped Ally setup via the mobile application.
Amped Ally System Setup via Ally App
Follow these steps if you want to configure your Amped Ally WiFi system using the Ally app:
-
First of all, connect your Ally devices (router and extender) to power sources and switch them on.
-
Thereafter, unlock your mobile phone and open the app store as per the availability of your smartphone’s OS.
-
Search for the Ally app and download it on a mobile device.
-
Launch the Ally application as soon as it gets installed.
-
Now, create your Ally account.
-
You have to go through the prompts appearing on the screen to make your Ally mesh WiFi system up and running.
That’s it! Your Amped Ally WiFi system is all set for you to kickstart your digital journey. Now, you can enjoy accessing the internet the way you fancy. Just in case you are unable to set up your Amped Ally device using any of these methods, the following Amped wireless troubleshooting tips will help you out.
Fixed: Can’t Do Amped Ally System Setup
-
Make sure that your Amped Ally extender as well as the Ally router is receiving a constant power supply. Any fluctuation in the electricity might put your Ally system at the risk of permanent damage.
-
If you are using the Manual method for Ally setup, the web browser must be updated. On the other hand, the Ally app must not be running on the outdated version of the mobile device being used for the Amped mesh WiFi system setup.
-
There should be an optimal distance between your Ally devices. It means that you are not allowed to cross the fine line that decides the distance separating your WiFi devices. Also, a wired connection requires a working Ethernet cable. Any cut or damage on it will distort the signal completely.
-
Neither your mobile device nor computer should be infected with viruses. This is because viruses are the major culprits halting the Amped Ally setup process. If possible delete them from devices forever by running a scan.
-
Avoid refreshing the Ally app or the web browser during the entire setup process. It might create issues during setup. Also, do not skip any on-screen prompt appearing on the dashboard of your Ally WiFi system. They are crucial and need to be followed in the exact order as they are mentioned.
Final Words
And, with that, we conclude our guide to setting up an Amped Ally whole-home mesh WiFi system. Here’s to hope that you will be able to make your Ally system up and running using one of the aforementioned methods.
