We are now able to access WiFi technology with advanced security features and internet protocols. However, still, there are some scenarios in which the Ethernet connection dominates the WiFi connection. Especially, the firmware update process of the Wavlink extender. It requires a direct connection between the extender and router using the Ethernet cable. However, the real problem arises when the Ethernet cable stops working and the streamline signals become jerky and even drop to zero putting the Wavlink firmware update process at a stall.
Are you also facing the same problem? Well, we have compiled some Wavlink extender troubleshooting hacks that will help you easily resolve the issue. But, before that have a nudge on the reasons creating the issue in the first place.
Possible Causes: WiFi Works But Not Ethernet
There can be a hoard of reasons that results in the WiFi works but not Ethernet issue. But, we have listed some of the topmost causes behind the problem:
-
Technical glitches
-
The Ethernet port is faulty
-
The Ethernet cable is faulty
-
Your device is utilizing a wireless connection
Now, let’s go over all the troubleshooting tips to fix the WiFi works but not Ethernet issue resolved.
Fixed: Wavlink WiFi Works But Not Ethernet
-
Reboot Your Extender
Technical glitches can put your Wavlink extender into a pit of various issues including the one you are already dealing with. Therefore, we advise you to eliminate technical glitches by implementing the easiest troubleshooting technique i.e. rebooting.
Rebooting your Wavlink extender does not require you to do a chemical reaction. All you have to do is switch off the extender, let it rest, and switch it on after a couple of minutes. Once your extender reboots, check if the Ethernet connection has started working or not.
-
Check Extender’s Periphery
Do you regularly dust off the dirt (if available) from your Wavlink device’s hardware? It looks like you are a little careless when it comes to the extender’s hardware. Chances are that the Ethernet port of your Wavlink extender has become dirty due to which you are even unable to access http ap setup using an Ethernet connection.
Without any delay, clean the dirt from your extender’s Ethernet port. If that doesn’t work, chances are that the Ethernet port itself is damaged. In that case, use another port to establish the Ethernet connection.
-
Replace the Ethernet Cable
Why didn’t you think it earlier? Perhaps, the Ethernet cable you are using is stranded from various points. Know that it not only interrupts the communication between your devices but also puts them at risk of damage due to fragmented signals.
Therefore, ensure that the Ethernet cable you are using is not damaged. Also, make sure that the connection is stable and secure.
-
Disable Wireless Connection
Last, but not least, you might face the WiFi works but not Ethernet issue if your device is utilizing the wired connection. FYI, a wired connection gets disrupted if the wireless one is actively participating and vice-versa.
Therefore, to get things in your favor, we recommend you disable a wireless connection for a while and check whether the Ethernet connection starts working or not. However, you need to access the Wavlink setup wizard on your computer.
The Conclusion
With that, we end our troubleshooting guide to fix the WiFi works with Wavlink extender but not Ethernet issue. Hopefully, the tips shared above will help you do away with the issue in a hassle-free manner.
Now, feel free to access the Wavlink extender login and update the firmware of your Wavlink WiFi extender to its latest version. We wish for you to have an exciting journey with your Wavlink device.
